This page describes scopes. It assumes you’ve read and understood the previous pages, build definition and task graph.

The whole story about keys 

Previously we pretended that a key like name corresponded to one entry in sbt’s map of key-value pairs. This was a simplification.

In truth, each key can have an associated value in more than one context, called a scope.

Some concrete examples:

There is no single value for a given key name, because the value may differ according to scope.

However, there is a single value for a given scoped key.

If you think about sbt processing a list of settings to generate a key-value map describing the project, as discussed earlier, the keys in that key-value map are scoped keys. Each setting defined in the build definition (for example in build.sbt) applies to a scoped key as well.

Often the scope is implied or has a default, but if the defaults are wrong, you’ll need to mention the desired scope in build.sbt.

Scope axes 

A scope axis is a type constructor similar to Option[A], that is used to form a component in a scope.

There are three scope axes:

If you’re not familiar with the notion of axis, we can think of the RGB color cube as an example:

color cube

In the RGB color model, all colors are represented by a point in the cube whose axes correspond to red, green, and blue components encoded by a number. Similarly, a full scope in sbt is formed by a tuple of a subproject, a configuration, and a task value:

scalacOptions in (projA, Compile, console)

To be more precise, it actually looks like this:

scalacOptions in (Select(projA: Reference),
                  Select(Compile: ConfigKey),

Scoping by the subproject axis 

If you put multiple projects in a single build, each project needs its own settings. That is, keys can be scoped according to the project.

The project axis can also be set to ThisBuild, which means the “entire build”, so a setting applies to the entire build rather than a single project. Build-level settings are often used as a fallback when a project doesn’t define a project-specific setting. We will discuss more on build-level settings later in this page.

Scoping by the configuration axis 

A dependency configuration (or “configuration” for short) defines a graph of library dependencies, potentially with its own classpath, sources, generated packages, etc. The dependency configuration concept comes from Ivy, which sbt uses for managed dependencies Library Dependencies, and from MavenScopes.

Some configurations you’ll see in sbt:

By default, all the keys associated with compiling, packaging, and running are scoped to a configuration and therefore may work differently in each configuration. The most obvious examples are the task keys compile, package, and run; but all the keys which affect those keys (such as sourceDirectories or scalacOptions or fullClasspath) are also scoped to the configuration.

Another thing to note about a configuration is that it can extend other configurations. The following figure shows the extension relationship among the most common configurations.

dependency configurations

Test and IntegrationTest extends Runtime; Runtime extends Compile; CompileInternal extends Compile, Optional, and Provided.

Scoping by Task axis 

Settings can affect how a task works. For example, the packageSrc task is affected by the packageOptions setting.

To support this, a task key (such as packageSrc) can be a scope for another key (such as packageOptions).

The various tasks that build a package (packageSrc, packageBin, packageDoc) can share keys related to packaging, such as artifactName and packageOptions. Those keys can have distinct values for each packaging task.

Global scope component 

Each scope axis can be filled in with an instance of the axis type (for example the task axis can be filled in with a task), or the axis can be filled in with the special value Global, which is also written as *. So we can think of Global as None.

* is a universal fallback for all scope axes, but its direct use should be reserved to sbt and plugin authors in most cases.

To the make the matter confusing, someKey in Global appearing in build definition implicitly converts to someKey in (Global, Global, Global).

Referring to scopes in a build definition 

If you create a setting in build.sbt with a bare key, it will be scoped to (current subproject, configuration Global, task Global):

lazy val root = (project in file("."))
    name := "hello"

Run sbt and inspect name to see that it’s provided by {file:/home/hp/checkout/hello/}default-aea33a/*:name, that is, the project is {file:/home/hp/checkout/hello/}default-aea33a, the configuration is * (means Global), and the task is not shown (which also means Global).

A bare key on the right hand side is also scoped to (current subproject, configuration Global, task Global):

organization := name.value

Keys have an overloaded method called .in that is used to set the scope. The argument to .in(...) can be an instance of any of the scope axes. So for example, though there’s no real reason to do this, you could set the name scoped to the Compile configuration:

name in Compile := "hello"

or you could set the name scoped to the packageBin task (pointless! just an example):

name in packageBin := "hello"

or you could set the name with multiple scope axes, for example in the packageBin task in the Compile configuration:

name in (Compile, packageBin) := "hello"

or you could use Global for all axes:

// same as concurrentRestrictions in (Global, Global, Global)
concurrentRestrictions in Global := Seq(

(concurrentRestrictions in Global implicitly converts to concurrentRestrictions in (Global, Global, Global), setting all axes to Global scope component; the task and configuration are already Global by default, so here the effect is to make the project Global, that is, define */*:concurrentRestrictions rather than {file:/home/hp/checkout/hello/}default-aea33a/*:concurrentRestrictions)

Referring to scoped keys from the sbt shell 

On the command line and in the sbt shell, sbt displays (and parses) scoped keys like this:


* can appear for each axis, referring to the Global scope.

If you omit part of the scoped key, it will be inferred as follows:

For more details, see Interacting with the Configuration System.

Examples of scoped key notation 

Inspecting scopes 

In sbt shell, you can use the inspect command to understand keys and their scopes. Try inspect test:fullClasspath:

$ sbt
> inspect test:fullClasspath
[info] Task: scala.collection.Seq[sbt.Attributed[]]
[info] Description:
[info]  The exported classpath, consisting of build products and unmanaged and managed, internal and external dependencies.
[info] Provided by:
[info]  {file:/home/hp/checkout/hello/}default-aea33a/test:fullClasspath
[info] Dependencies:
[info]  test:exportedProducts
[info]  test:dependencyClasspath
[info] Reverse dependencies:
[info]  test:runMain
[info]  test:run
[info]  test:testLoader
[info]  test:console
[info] Delegates:
[info]  test:fullClasspath
[info]  runtime:fullClasspath
[info]  compile:fullClasspath
[info]  *:fullClasspath
[info]  {.}/test:fullClasspath
[info]  {.}/runtime:fullClasspath
[info]  {.}/compile:fullClasspath
[info]  {.}/*:fullClasspath
[info]  */test:fullClasspath
[info]  */runtime:fullClasspath
[info]  */compile:fullClasspath
[info]  */*:fullClasspath
[info] Related:
[info]  compile:fullClasspath
[info]  compile:fullClasspath(for doc)
[info]  test:fullClasspath(for doc)
[info]  runtime:fullClasspath

On the first line, you can see this is a task (as opposed to a setting, as explained in .sbt build definition). The value resulting from the task will have type scala.collection.Seq[sbt.Attributed[]].

“Provided by” points you to the scoped key that defines the value, in this case {file:/home/hp/checkout/hello/}default-aea33a/test:fullClasspath (which is the fullClasspath key scoped to the test configuration and the {file:/home/hp/checkout/hello/}default-aea33a project).

“Dependencies” was discussed in detail in the previous page.

We’ll discuss “Delegates” later.

Try inspect fullClasspath (as opposed to the above example, inspect test:fullClasspath) to get a sense of the difference. Because the configuration is omitted, it is autodetected as compile. inspect compile:fullClasspath should therefore look the same as inspect fullClasspath.

Try inspect *:fullClasspath for another contrast. fullClasspath is not defined in the Global scope by default.

Again, for more details, see Interacting with the Configuration System.

When to specify a scope 

You need to specify the scope if the key in question is normally scoped. For example, the compile task, by default, is scoped to Compile and Test configurations, and does not exist outside of those scopes.

To change the value associated with the compile key, you need to write compile in Compile or compile in Test. Using plain compile would define a new compile task scoped to the current project, rather than overriding the standard compile tasks which are scoped to a configuration.

If you get an error like “Reference to undefined setting“, often you’ve failed to specify a scope, or you’ve specified the wrong scope. The key you’re using may be defined in some other scope. sbt will try to suggest what you meant as part of the error message; look for “Did you mean compile:compile?”

One way to think of it is that a name is only part of a key. In reality, all keys consist of both a name, and a scope (where the scope has three axes). The entire expression packageOptions in (Compile, packageBin) is a key name, in other words. Simply packageOptions is also a key name, but a different one (for keys with no in, a scope is implicitly assumed: current project, global config, global task).

Build-level settings 

An advanced technique for factoring out common settings across subprojects is to define the settings scoped to ThisBuild.

If a key that is scoped to a particular subproject is not found, sbt will look for it in ThisBuild as a fallback. Using the mechanism, we can define a build-level default setting for frequently used keys such as version, scalaVersion, and organization.

For convenience, there is inThisBuild(...) function that will scope both the key and the body of the setting expression to ThisBuild. Putting setting expressions in there would be equivalent to appending in ThisBuild where possible.

lazy val root = (project in file("."))
      // Same as:
      // organization in ThisBuild := "com.example"
      organization := "com.example",
      scalaVersion := "2.12.2",
      version      := "0.1.0-SNAPSHOT"
    name := "Hello",
    publish := (),
    publishLocal := ()

lazy val core = (project in file("core"))
    // other settings

lazy val util = (project in file("util"))
    // other settings

Due to the nature of scope delegation that we will cover later, we do not recommend using build-level settings beyond simple value assignments.

Scope delegation 

A scoped key may be undefined, if it has no value associated with it in its scope.

For each scope axis, sbt has a fallback search path made up of other scope values. Typically, if a key has no associated value in a more-specific scope, sbt will try to get a value from a more general scope, such as the ThisBuild scope.

This feature allows you to set a value once in a more general scope, allowing multiple more-specific scopes to inherit the value. We will disscuss scope delegation in detail later.


sbt Reference Manual
    1. Scopes