Migrating from sbt 0.12.x 

Introduction 

Before sbt 0.13 (sbt 0.9 to 0.12) it was very common to see in builds the usage of two aspects of sbt:

The release of sbt 0.13 (which was over 3 years ago!) introduced the .value DSL which allowed for much easier to read and write code, effectively making both aspects redudant and they were removed from the official documentation.

As they will be removed in upcoming release of sbt 1.0.0 we’ve deprecated them in sbt 0.13.13, and here we’ll help guide you to how to migrate your code.

Migrating simple expressions 

With simple expressions such as:

a <<= aTaskDef
b <+= bTaskDef
c <++= cTaskDefs

it is sufficient to replace them with the equivalent:

a := aTaskDef.value
b += bTaskDef.value
c ++= cTaskDefs.value

Migrating from the tuple enrichments 

As mentioned above, there are two tupe enrichments .apply and .map. The difference used to be for whether you’re defining a setting for a SettingKey or a TaskKey, you use .apply for the former and .map for the latter:

val sett1 = settingKey[String]("SettingKey 1")
val sett2 = settingKey[String]("SettingKey 2")
val sett3 = settingKey[String]("SettingKey 3")

val task1 = taskKey[String]("TaskKey 1")
val task2 = taskKey[String]("TaskKey 2")
val task3 = taskKey[String]("TaskKey 3")
val task4 = taskKey[String]("TaskKey 4")

sett1 := "s1"
sett2 := "s2"
sett3 <<= (sett1, sett2)(_ + _)

task1 := { println("t1"); "t1" }
task2 := { println("t2"); "t2" }
task3 <<= (task1, task2) map { (t1, t2) => println(t1 + t2); t1 + t2 }
task4 <<= (sett1, sett2) map { (s1, s2) => println(s1 + s2); s1 + s2 }

(Remember you can define tasks in terms of settings, but not the other way round)

With the .value DSL you don’t have to know or remember if your key is a SettingKey or a TaskKey:

sett1 := "s1"
sett2 := "s2"
sett3 := sett1.value + sett2.value

task1 := { println("t1"); "t1" }
task2 := { println("t2"); "t2" }
task3 := { println(task1.value + task2.value); task1.value + task2.value }
task4 := { println(sett1.value + sett2.value); sett1.value + sett2.value }

Migrating when using .dependsOn, .triggeredBy or .runBefore 

When instead calling .dependsOn, instead of:

a <<= a dependsOn b

define it as:

a := (a dependsOn b).value

Note that you’ll need to use the <<= operator with .triggeredBy and .runBefore in SBT 0.13.13 and earlier due to issue #1444.

Migrating when you need to set Tasks 

For keys such as sourceGenerators and resourceGenerators which use sbt’s Task type:

val sourceGenerators =
  settingKey[Seq[Task[Seq[File]]]]("List of tasks that generate sources")
val resourceGenerators =
  settingKey[Seq[Task[Seq[File]]]]("List of tasks that generate resources")

Where you previous would define things as:

sourceGenerators in Compile <+= buildInfo

now you define them as:

sourceGenerators in Compile += buildInfo.taskValue

Migrating with InputKey 

When using InputKey instead of:

run <<= docsRunSetting

when migrating you mustn’t use .value but .evaluated:

run := docsRunSetting.evaluated

Contents

sbt Reference Manual
      1. Migrating from sbt 0.12.x